how to order 4 3 2 1 pressure sensor series pse530 option pse53 0 m5 nil l cl option without cable 0 1 2 3 pressure sensing range high pressure [0 to 1 mpa] v acuum [0 to ?01 kpa] low pressure [0 to 101 kpa] compound pressure [?01 to 101 kpa] m5 port size m5 x 0.8 sensor cable (3 m) sensor cable (3 m) + connector (1 pc.) description part no. zs-26-e zs-26-f zs-26-g note 4 pcs. per set cable length: 3 m cable length: 3 m connector sensor cable connector + sensor cable specifications model PSE530-M5 0 to 1 mpa 1.5 mpa pse531-m5 0 to ?01 kpa air/non-corrosive gas 12 to 24 vdc (ripple 10% or less) 15 ma or less analog output (1 to 5 v, output impedance: approx. 1 k ? ) 2% f.s. or less (within rated pressure range, ambient temperature 25 3 c) 1% f.s. or less 1% f.s. or less 1% f.s. or less based on the analog output at 18 v ranging from 12 to 24 vdc ip40 0 to 50 c; stored: ?0 to 70 c (no freezing or condensation) 1000 vac, 50/60hz for 1 minute between external terminals and case 5 m ? between external terminals and case (at 50 vdc) 10 to 500 hz at whichever is smaller of 1.5 mm amplitude or 98 m/s 2 acceleration, in x, y, z directions, for 2 hours each (de-energized) 980 m/s 2 in x, y, z directions, 3 times each (de-energized) 2% f.s. or less based on the analog output value at 25 c from a range of 0 to 50 c m5 x 0.8 body: stainless steel grade 303, internal enclosure: ppe; pressure sensor: silicon; o-ring: nbr halogen-free heavy-duty cord, ?.7, 0.15 mm 2 , 3 cores, 3 m pse533-m5 ?01 to 101 kpa pse532-m5 0 to 101 kpa 500kpa rated pressure range proof pressure fluid po w er supply voltage current consumption output specification accuracy linearity repeatability po w er supply voltage effect enclosure t emperature range withstand voltage insulation resistance vibration resistance impact resistance t emperature characteristics (based on 25 c) port size material sensor cable/option resistance connector when only optional parts are required, order using the part n umbers listed below. the connector is not connected to the cable at the time of shipment. note) at the factory, the connector is not connected to the cable, but packed together with it for shipment. 16-3-4
|
